Menu
Your Cart

ATMOS DC 25 S

ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
Pre-Order
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S
ATMOS DC 25 S

Wood Pyrolysis Boiler ATMOS DC

The pyrolysis of the wood (reverse combustion) takes place in the lower chamber (flame chamber), where the flame is driven by a forced movement of air, caused by the suction fan.

ATMOS Generator - the best choice in wood burning: The boilers were developed based on the experience of developing wood vaporization generators (vaporization units under the DOGOGEN brand), which were used for cars and ships in the years 1935-1945. Further development of wood vapor generators for cars and A.C. generators continued later in the years 1980-1985 with exports to Vietnam. The modern construction of boilers has perfect technical characteristics and low exhaust gas emissions. The products are exported worldwide and meet the strictest specifications and ecological requirements.

CONTROL:

  • Honeywell Thermostatic Combustion Air Control Valve
  • Boiler thermostat
  • Safety thermostat
  • Exhaust gas thermostat stops the fan once the fuel runs out.

ADVANTAGES OF ATMOS BOILERS:

  • Possibility of feeding with long wood
  • The fan ensures stable and efficient combustion
  • The suction fan prevents smoke from escaping into the boiler room and ensures efficient combustion
  • Perfect access for cleaning the boiler
  • After running out of fuel, the flue gas thermostat stops the fan
  • Cooling loop to prevent overheating

OTHER ADVANTAGES OF ATMOS BOILERS:

  • Pressure controlled suction fan (DC 70S)
  • Large capacity wood shed
  • Flat flue routes
  • Primary and secondary air high temperature preheating paths
  • Easy operation and easy cleaning
  • Ash removal without smoking
  • Small dimensions and robust construction
  • High quality
  • Attractive price
  • Simple operation and excellent performance
  • Flame chamber lined with high quality ceramic plates
  • Suction fan
  • Cooling loop to protect against overheating

INSTALLATION: Atmos boilers are small in size and light in weight, making them easy to install. The boiler must be connected either to a three-way thermostatic valve or to the Laddomat 21 system so that the return temperature is not below 65 °C. The operating temperature of the boiler must be maintained between 80 and 90 °C. Connection with an inertia tank is recommended. Boilers should not be installed in vital spaces but in separate, directly ventilated rooms.

ENVIRONMENT: Reverse combustion and ceramic plates ensure perfect combustion and minimize harmful gas emissions. The boilers meet the criteria of an environmentally friendly product, as defined in Directive 13/2002 of the Czech Ministry of the Environment. According to the CSN EN 303-5 standards, the boilers fall into category III. Thus they fulfill the EU requirements.

Boiler dimensions (mm)   DC18S DC22S DC25S DC30SX DC32S DC40SX DC50S
A High   1185 1185 1185 1185 1260 1260 1260
B Depth   758 959 959 959 959 959 1160
C Width   675* 675* 675* 675* 678 678 678
D   874 874 874 874 950 950 950
E Smoke Outlet   150 150 150 150 150 150 150
F   65 65 65 65 69 69 69
G   208 208 208 208 185 185 185
H   933 933 933 933 1008 1008 1008
CH   212 212 212 212 256 256 256
I   212 212 212 212 256 256 256
J   6/4″ 6/4″ 6/4″ 6/4″ 6/4″ 6/4″ 2″
    ATMOS Boiler
Specification   DC18S DC22S DC25S DC30SX DC32S DC40SX DC50S
Rated power kW 20 22 25/27 30 35 40 49,9
Heating surface m2 1,8 2,1 2,3 2,3 2,9 2,9 3,8
Fuel shaft volume dm3 (l) 60 95 95 95 135 135 180
Filling hole dimensions mm 450 x 260 450 x 260 450 x 260 450 x 260 450 x 260 450 x 260 450 x 260
Prescripted chimney draft Pa / mbar 18 / 0,18 23 / 023 23 / 0,23 24 / 0,24 24 / 0,24 24 / 0,24 25 / 0,25
Max. working water overpressure kPa / bar 250 / 2,5 250 / 2,5 250 / 2,5 250 / 2,5 250 / 2,5 250 / 2,5 250 / 2,5
Boiler weight kg 269 324 326 332 366 368 433
Gas-outlet pipe diameter mm 150 / 152 150 / 152 150 / 152 150 / 152 150 / 152 150 / 152 150 / 152
Ingress protection of electric parts IP 20 20 20 20 20 20 20
Electric input W 50 50 50 50 50 50 50
Efficiency over the entire performance range % 90,1 89,9 89,9 89,9 88,9 88,9 87,7
Boiler class   5 5 5 5 5 5 4
Energy efficiency class   A+ A+ A+ A+ A+ A+ A+
Flue gas temperature at rated power °C 157 177 177 177 185 185 255
Waste gas combustion products flow weight at nominal output kg / s 0,012 0,014 0,015 0,017 0,02 0,022 0,025
Specified fuel (preffered)   Dry wood with a calorific value of 15 – 18 MJ/kg-1, water content 12 – 20 %, diameter 80 – 120 mm
Average consumption for the heating season kg.h-1 20 22 25 30 35 40 50
Wood lenght mm 330 530 530 530 530 530 730
Combustion time at nominal output Hours 2 3 3 2 3 2
Appliance
Category Wood Boiler
Type Gasification
Fuel Wood
Specifications & Performance
Combustion Outlet Diameter (cm) 15
Efficiency (%) 89.9
Energy Class EEI2019 A+
Nominal Power (Kcal) 23220
Nominal Power (KW) 27
Dimensions
Depth (cm) 95.9
Height (cm) 118.5
Weight (Κgr) 326
Width (cm) 67.5

Write a review

Please login or register to review
3,499.00€
Ex Tax: 2,821.77€
  • Stock: Pre-Order
  • Model: Oi-WBLR-000001
  • Weight: 326.00kg
  • MPN: 22004192
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site.By pressing the OK you accept them all. Privacy Policy.